Nipple with external thread
Our consultant will save your time!
+7 (962) 383-76-36
Metal hose with end fittings nipple with external thread corresponds to a series ST040. Designed for quick joining of pipelines. Made with external single or double steel braid. Mounted on the ends of the fittings with external thread, allowing to carry out sealed joining. Connecting threaded fittings nipple is made of steel Ст20сп.
The percentage Ст20сп
|0,09−0,15||≤0,008||≤0,08||0,15−0,3||≤0.3 mm||≤0.3 mm||0,25−0,5||≤0,05||≤0,04||≤0.3 mm||98|
Thanks to the steel braided sleeve can withstand the highest pressure. The number of braids depends on the working pressure. Braid are made of stainless steel 12KH18N10T, AISI 304, AISI 321.
Percentage composition according to GOST 5632−72
Quality metal hose have a number of requirements, in particular should not be dangling wires, mechanical damage, penetrating defects. These metal hoses are produced with cross-sections up to 300 mm length from 25 cm up to six metres.
Metal sleeve with male thread is used at temperatures from cryogenic to +600 degrees and an operating pressure from vacuum to 350 Bar. Used in all industries for pumping fuels, lubricants, steam. Working in a wide range of temperatures and pressures. Metal sleeve with an external thread, and compensate for axial thermal expansion and absorb vibration of operating equipment, extend the life of the pipelines. The service life of a flange of metal hoses depends on the intensity of load cycles, temperature and pressure, oscillation amplitude, the displacement of the metal hose, the bending radius. The service life of a flange of metal hoses depends on the intensity of load cycles, temperature and pressure, oscillation amplitude, the displacement of the metal hose, the bending radius.
Installation works with metal hose, with threaded coupling nipple, do not have too much difficulty. This connection is reliable and provides the possibility of repeated Assembly and disassembly. In the area of the fitting should be neutral areas that are not subject to deformation during operation. The installation provides a minimum length loose sites — no more than two meters. For supports use clamps or special trays.
Get acquainted with the range, specify main features, advantages, the use parameters products you can on our website. The company «_" represents an infinite range of metal hoses. Carried out both wholesale and retail deliveries.
buy at best price
Consistently high quality of metal hoses with end fittings nipple with external thread, will help realize current production tasks. Reasonable prices and a wide range of metal conduit, make your purchase convenient and comfortable. Full compliance with the requirements of the normative documentation for products that will provide long-term trouble-free operation of the whole complex of the industrial equipment. In the absence of the range of products necessary parameters can be considered the possibility of fabrication of metal hoses on the submitted drawings.