Pipe, sheet, plate

Our consultant will save your time!

Alexander

Alexander

sales department

+38 (063) 073-44-92

FEATURE

Titanium alloy ВТ16 refers to a group of wrought α+β-alloys. The alloy was developed by Viama. Production of normalized GOST 19807−74, 90013−81 OST. The doping with aluminum of 1.8% to 3.8%, molybdenum 4.5 to 5.5%, V 4−5%.gives long products manufacture of optimal technological properties. Hardened by heat treatment. The optimal combination achieved a double and isothermal annealing.

Percentage composition of the brand ВТ16 according to GOST 19807−91

Al C Si Fe Mo Zr N O H V Ti
1,8−3,8 ≤0,1 ≤0,15 ≤0,25 4.5 to 5.5 ≤0.3 mm ≤0,05 ≤0,15 ≤0,015 4−5 84,85−89,7

The Titan is a basis; it is the percentage specified in the table. Limit short-term strength of rolled reaches 1300−1400 MPa. Hardness after quenching and aging 30−40 MPa. The density of 4.68 g/cm3.

buy at best price

Quality manufacturer with constant control of observance of requirements of technological discipline, absolute conformity of wire, round, rod brand ВТ16 all items of the normative documentation, acceptable cost products determines the popularity of such semi-finished products for the needs of modern production. Our company represents the entire product range of products of any grades of titanium and provides constant attention to the needs of each customer, regardless of order volume.