Our consultant will save your time!

Alexander

Alexander

sales department

+38 (063) 073-44-92

Supplier KMZ offers lead solder brand Possu25−2 at economical price. Regular customers can take advantage of the discount discount. CMH ensures timely delivery of products to any email address. The price is the best in this segment of the rental.

Technical characteristics

Lead-tin solders brand Possu25−2 increased the percentage of antimony belongs to the so-called soft solders, the melting temperature does not exceed 260 °C. a higher percentage of antimony provides resistance to surface oxidation in the zone of soldering/tinning. At the same time increases and the heat resistance (100°C). During the deforming processing of the solder it will not increase its strength characteristics. The solder connection is formed more slowly in comparison with the alloys containing a higher percentage of tin,

Application

Used for permanent connection of the various components of electrical assemblies, as well as for decorative cladding of flat surfaces. Consider the alloy is also used for tinning and soldering metal and galvanized products. Widely used in household appliances, heating appliances, refrigerators, widely used in the automotive industry.

Chemical composition of GOST 21930−76 and 21931−76

Lead Tin Antimony Copper Bismuth Arsenic Iron Nickel Sulfur Zinc Aluminium
Basis 24…26 1,5…2,0 ≤0,08 ≤0,20 ≤0,02 ≤0,02 ≤0,08 ≤0,02 ≤0,002 ≤0,002

Physical characteristics of the solder

  • Density, kg/m3 — 9800;
  • Melting point, °C — 265;
  • Temperature range of crystallization, °C — 75;
  • Coefficient of thermal conductivity, W/mgrad — 80;
  • Electrical resistivity, Ohm·mm2/m 0,185.

The mechanical characteristics of the solder

  • The limit of temporary resistance, MPa — 35;
  • Brinell hardness number, HB, no more than 13;
  • Relative tensile elongation, percent — 35.

Supply (GOST 21931−76)

The range of the supplied solder — coil weight from 0.5 to 8 kg and Bay up to 12 kg. wire Diameter — 0.5 to 7.0 mm. Diameter bars with diameter 8 to 12 mm are supplied with a length of 400±20 mm. On request it is possible to supply solder to the ribbon thickness of 0.8…5.0 mm with width from 8 to 15 mm.

Buy

Supplier KMZ offers to buy lead solder brand Possu25−2 at economical price. Regular customers can take advantage of the discount discount. The provider ensures timely delivery of products to any email address. The price is the best in this segment of the rental.

Supplier, price

Buy lead solder brand Possu25−2 provider KMZ can at an affordable price. The price is formed based on the European standards of production. Buy solders of any brand in stock at a reasonable price, you can wholesale or retail.