Our consultant will save your time!

Vitaliy

Vitaliy

sales department

+38 (095) 209-60-73

General characteristics

Stainless steel hexagon refers to semi-finished long products. In cross section it forms a hexagon with equal sides. Thanks to the optimal composition and special manufacturing technology, it is characterized by the highest wear resistance and durability that allows it to work under continuous load, in a hostile environment with significant temperature changes. Strength qualities allow to use it for parts trucks and cars. This hexagon are the most relevant in the manufacture of the fastening fittings (bolts, nuts).

production

.The hexagon is made from the following steel grades: 10H17N13M3T, 10H17N13M2T, 17H18N9, 12H13, 12KH18N9T, 12H18N9, 12H18N10T, 20X13. Precision rolling Stainless steel hexagon bar can be: high and normal precision. Pieces are manufactured off-gage, gauging and multiple of gauging length. On him. the composition of the hexagons are of high quality and high quality. According to the production technology, they are divided into hot rolled, forged I. calibrated. The degree of curvature at the 1st and 2nd class. Hexagon has several surfaces, each of which is relevant in their field. For example, to create metal structures applied design mirror hexagon.

Percentage composition according to GOST 5632−72

Alloy C Si   Ti Cr Mn P S Ni Fe

20X13

0,16−0,25 ≤0,6 --- 12−14 ≤0,6 ≤0,03 ≤0,025 ≤0,6 basis

10X17H13M2T

Hexagon of this grade of steel alloyed with molybdenum and titanium, has considerable resistance to action of high temperature environment, industrial condensate, vibration. Without such a hexagon does not do the installation of chemical and food equipment, where a particularly important requirement is the stability against erosive environments.

Percentage composition GOST 5632−72.

Alloy C Mo Ti Ni Cr Mn P S Si Fe
10H17N13M3T ≤0,1 3−4 ≤0,7 12−14 16−18 3−4 ≤0,035 ≤0,02 ≤0,8 basis

12X18H9T

The alloy 12X18H9T belonging to the group chromium-Nickel corrosion-resistant steels austenitic-ferritic class allows you to use hexagon for parts operating in contact with oxidizing environments, acids average concentration and organic solvents. Thanks to the optimal technological and operational parameters, such hexagon actively oppose the influence of aggressive factors, providing reliability and durability of the equipment

Percentage composition GOST 5632−72.

Alloy C Ti Cu Ni Cr Mn P S Si Fe
12X18H9T ≤0,12 ≤0,8 ≤0.3 mm 8−9,5 17−19 ≤0,2 ≤0,035 ≤0,02 ≤0,8 basis

delivery

Hexagon is implemented in coils and bars. The price depends on the parameters of products, of alloy grades and additional conditions of delivery. Hexagon 12X18H10T differs reasonable price and a wide variety of sizes that will allow any buyer to choose the product which most fully satisfies its needs.

BUY AT best PRICE

The price of stainless steel hexagon depends on the parameters of products, of alloy grades and additional conditions of delivery. Stainless steel hexagon bar from the «_" has an optimal ratio of price and quality that will allow any buyer to choose the product that best meets its needs. Full conformity with requirements of the state normative documents and technical conditions for the supply — main principle of our company in work with clients. And reasonable prices and convenient delivery method is the additional benefit of working with us.