Sheet, plate, strip, foil

Our consultant will save your time!

Alexey

Alexey

sales department

+38 (093) 727-19-11

characteristic

VT5 grade belongs to the group of the first domestic titanium alloys for industrial applications. This alloy has a single-phase α-structure. VT5 was developed in the middle of the twentieth century by the design association VIAM. The casting version of VT5L alloy became a domestic analogue of the foreign brand Ti-5Al-22,5Sn. It is not hardened by hardening.

Bar Treatment Thickness (mm) Strength (MPa) KCU J / cm³ Plasticity δ%
VT5−1 Annealing 10 — 60 D 785 — 981 > 40 > 10
— «- 140 — 250 P 745 — 981 > 45 > 6
— «- 140 — 250 T 765 — 981 > 45 > 8
— «- 5 — 100 D 785 — 981 > 40 > 10
— «- 101 — 150 P 745 — 981 > 45 > 6
VT5−1 — «- 12 843.3 — 926.7 65.2 — 86 12−14
VT5−1 Annealing 700 ° 1 hour 18 944 60 21
1000−800 ° 1 h, air
891 --- 12
1100 ° 1 h, water 970 ° 1 h with oven to 650 °, air
902 --- 12
VT5−1 Annealing 800 ° 14 x 14 777 --- 13.8

B — high-direction cutting of samples; D — longitudinal; T is tangential, and Π is transverse.

Long-term strength is determined by the amount of force that destroys the sample for a certain time at a specific temperature. That is, as the temperature and load increase, the ultimate strength decreases.

using

High chemical and cryogenic resistance, plasticity, good weldability, insensitivity to incisions, considerable fatigue strength, allows using semi-finished products of the VT series in cryogenic equipment, shipbuilding, machine building, rocket building, aviation, processing industry, etc.

Physical properties
The temperature at which these characteristics were obtained t ° C 20 ° С
Coefficient of linear thermal expansion α [1 / degree] 10.47 x 10 -6
Density [g / cm 3 ] 4.4
Modulus of elasticity of the first kind, E [MPa] x10 -5 1.05
Specific heat at 20 ° C С [kJ / (kg · deg)] 0.586

The limit is short. Strength bars annealed s in [MPa]

750−980
Coefficient of thermal conductivity), l [W / (m · deg)] 18.85

Buy at the best price

High-quality manufacturing with constant control of compliance with the requirements of technological discipline, absolute compliance of titanium semi-finished products with all items of regulatory documentation, acceptable cost of products determines the great popularity of titanium alloy VT5, VT5−1 for modern production needs. Our company represents the entire range of wire, circle, rod grade VT5, VT5−1 and provides constant attention to the needs