Our consultant will save your time!

Stanislas

Stanislas

sales department

+7 (905) 233-21-42

General characteristics

Chromium-Nickel steel 20H23N18 (ЭИ417) belongs to the category of heat-resistant alloys of austenitic class. High quality steel allow to use it in an oxidizing atmosphere at t° to 1050 °C. Chromium and Nickel, the total percentage of which in the alloy may reach 45%, protect the surface of structures, from wet corrosion and corrosion cracking in alkaline and chloride environments, gives resistance to intergranular corrosion. Supplements silicon, manganese, titanium additionally improve manufacturability and performance.

COMPOSITION

Percentage composition according to GOST 5632−72.

Alloy C Si Cr Ni Mn P S Fe
20H23N18 ≤0,2 ≤1 22−25 17−20 ≤2 ≤0,035 ≤0,02 basis

Steel is smelted in open electric furnaces. Rashkovka semi-finished products is in the range of 1180 °C to 900 °C and tempering at t° 1050°-1150°C With cooling in water or air. Manufacture of semi-finished products of the brand 20H23N18 normalized following GOST: 1133−71, 5582−75, 5949−75, 4405−75, 7417−75, 8559−75, 7350−77, 14955−77, 8560−78, 4986−79, 2590−2006, 2591−2006, 2879−2006, and also THAT: 14−1-377−72, 14−11−245−88. Substitutes steel 20H23N18 considered to be brand 20Х23Н13 and 15KH25T. Steel 20H23N18 has unlimited weldability using all welding methods,

application

Manufacture of ovens: muffles, screens, seamless pipes, parts of burners, blades, bandages, details of combustion chambers, nozzles and nozzles for burners, uncooled surfaces of steam boilers. The usage temperature of steel 20H23N18 may vary depending on conditions. Small parts — the blades, tyres, able to withstand the temperature increase to 800 °C, and the sheets and coatings of this alloy have heat resistance to temperatures up to 1050 °C.

buy at best price

The reasonable cost of semi-finished products of the brand 20H23N18 and a wide range of sizes of products allows any customer to choose the option that most fully satisfy the current requests. High quality workmanship and full compliance of products with the requirements of the state normative documents and technical conditions for the supply — the main criterion, which adheres to our company in working with clients. Calibrated chemical composition and manufacturing technology, ensure high quality and reliability products and reasonable prices and convenient delivery method is the additional benefit of working with us.