Our consultant will save your time!

Stanislas

Stanislas

sales department

+7 (905) 233-21-42

relevance

Today produced a range of tin solders, which are widely demanded by electrical engineering, electronics, instrumentation, installation of HVAC equipment. It should be noted that the advantage of tin solders is a small price to pay. They are very practical to use plastic, giving high durability, soldering, distinguished corrosion resistance. Used to connect any non-ferrous alloys.

feature

The composition of tin solders tin also includes such low-melting metals such as lead antimony, alloyed with zinc, aluminum, cadmium. The strength of soldering is 8 kg/mm2 and is directly proportional to the percentage of tin in the solder. The presence of antimony also enhances the ration, but only when connecting copper parts. When soldering brass parts antimony such influence does not already have a soldering iron — even lowers the strength of the contact. Zinc increases the corrosion resistance of the contacts. The high content of zinc requires additives such as cadmium or silver. Solders with 10−40% zinc, is typically used for the treatment and brazing of aluminum alloys by ultrasonic method. With the increase of zinc content melting point of the solder increases.

use

Soft solders are produced in the tubules placed inside the flux and rarely in the form of wire. The range is so-called paste is powdered solder with flux. It should be remembered that the application of the paste causes a number of limitations. For example, zinc chloride is quite hygroscopic and it remains on the soldering may lead to corrosion. Prohibited its application as ammonia during installation of electrical sensors, in connection with the emergence of a Copperhead on the copper contacts, which can lead to distorted readings. When soldering tin solder flux is rosin.

supply

Get acquainted with the range, specify main features, advantages, the use parameters products you can on our website. In the company «_" features unlimited range of solders in the form of ingots and bars, tubes, wire, bar, powders, foil, tapes, soldering pastes that are manufactured with strict adherence to technological norms. Carried out both wholesale and retail deliveries.

BUY AT best PRICE

The cost of solders is based bets on the London stock exchange of nonferrous metals. A large variety of products in stock, LLC «_" will allow any buyer to make the optimal choice. High quality all brands of solders, full compliance with the requirements of the state normative documents and technical conditions for the supply — the main criterion, which adheres to our company in working with clients. OOO «_" is a reliable partner, accurate and conform to the specifications of products, reasonable prices and convenient delivery method is the additional benefit of working with us.