Our consultant will save your time!



sales department

+7 (905) 233-21-42

The material with the 36NXTU8M marking belongs to the category of precision alloys with regulated elastic characteristics. Such materials, as a rule, are used in the production of various elastic elements designed to work in conditions of elevated temperatures (up to four hundred degrees Celsius).

Characteristics of 36NXTiu8M alloy

The presence in this raw material of a number of chemical elements such as molybdenum, titanium, chromium, nickel and some others with unique properties determined the high performance characteristics of semi-finished products. In addition to high elasticity and stability of shape, even when working in high temperature zones, this material has sufficient resistance to corrosion damage, which is actively used in various areas of the industrial complex. Most often semi-finished products from such an alloy serve as a raw material for the manufacture of elements with specified elasticity characteristics of high sensitivity.


Chemical composition as a percentage
silicon carbon iron manganese phosphorus nickel sulfur titanium molybdenum chromium
0.8−1.2 0.3−0.7 34.51−40.7 35−37 12−13.5 Up to 0.02 Up to 0.02 1−1.3 2.7−3.2 7.5−8.5
physical characteristics
Name Units Symbol The numerical value
Elastic modulus MPa Ex10 -5 1.42
Measurement temperature ° C T 20
Density Kg / m 3 R 8200
Electrical resistance (specific) Omxm Rx10 9 420
Mechanical properties (at 20 ° C)
Name of the characteristic The numerical value of the parameter for products according to GOST 14080−78
Thinning tape
Short-term tensile strength, MPa (ss) 930

Magnetic characteristics

Coercive force (not more than), (A / m) Ns
Magnetic permeability (not more than), (MH / m) Umax
Specific losses (no more) at a frequency of 50 Hz and a magnetic induction of 1 T, (W / kg) P1,0 / 50
The magnetic induction T (at least), with a magnetic field strength of 100, in magnetic fields (A / m) B100

Weldability indexes

The alloy has limitations on weldability The welding process requires some preliminary preparation (warming the contacting surfaces to one hundred and one hundred and twenty degrees and subsequent heat treatment of the seam zone)
The alloy has no weld constraints No additional operations are required
Hard to weld material It is necessary to warm the contacting surfaces to two hundred or three hundred degrees, the subsequent annealing and heat treatment after the end of the welding process

Buy at the best price

Our site offers a wide range of products from precision materials. The high quality of products and the absence of intermediaries determine the most favorable conditions for the acquisition of such material as the alloy 36NXTU8M for solving any problems of modern production. Delivery in a short time in almost any region of the CIS and compliance products normative documentation has long won the love and trust of regular customers. Due to the relatively low cost and wide size and model range, semi-finished products of brand 36НХТЮ8М enjoy constant demand in all spheres of production.