Nichrome wire

Our consultant will save your time!

Igor

Igor

sales department

+7 (962) 383-76-36

Relevance

Of the nichrome wire section 0.2−2 mm produce heating elements. Electrothermal equipment, as well as precision resistors. The most widely nichrome wire is used in industrial drying and firing ovens. The main advantages of nichrome wire are explained by its chemical composition. The value is not only the presence of certain elements, but also their correlation. Therefore, in order to choose the right alloy, it is necessary to get acquainted with the most important qualities of all used nichrome brands.

Nichrome brands

Nichrome Х15Н60 is an alloy that consists of nickel-60% and chromium-15%, the rest — iron and impurities: titanium, manganese, silicon, carbon, aluminum, etc.

The percentage composition of X15N60 is GOST 10994−74 .

Alloy C Al Fe Ni Cr Mn P Ti Si S
X15N60 ≤0.15 ≤0.2 17.3−29.2 55−61 15−18 ≤1,5 ≤0,03 ≤0.3 0.8−1.5 ≤0,02

In nichrome X15N60 nickel is less than in brand Х20Н80, which reduces the heat resistance index, and the iron content is higher than in Х20Н80, which leads to the appearance of magnetic properties and less corrosion resistance.

The percentage composition of H20N80 is GOST 10994−74 .

Alloy C Al Fe Ni Cr Mn P Ti Si S
X20N80 ≤0,1 ≤0.2 ≤1,5 72.7−79.1 20−23 ≤0,7 ≤0,03 ≤0.3 0.9−1.5 ≤0,02

The brand Х20Н80 is popular due to the ability to work at high temperature for a long time. Heat resistance is greater than that of nichrome 15H60. The operating temperature of X20N80 can reach 1250 ° C. Widely used for air and water heaters, electric furnace spirals, for thermo-knives, etc.

Physical properties of nichrome X20N80
Ud. Weight g / cm 3 8.4
Operating temperature t ° С Up to 1250 ° С
Melting point t ° C 1400 ° C
Annealing temperature t ° С 870−1040 ° C
Ud. Electric resistance Ohmmm 2 / m 1.18
Thermal conductivity K [W / (m · K)] 92
Mechanical strength GPa 0.75−0.8

Advantages

— Heat resistance and heat resistance, even in conditions of constant interaction with corrosive environments (the temperature in the working zone can reach one thousand two hundred and fifty degrees);

— ability to maintain shape stability under the influence of high temperatures;

— plasticity, which makes it easy to process this material even in a cold state;

— low electrical resistance, indispensable in the production of heaters.

disadvantages

The main disadvantage is the high cost of nichrome.

Buy at the best price

The company «_" sells nichrome wire at the best price from the manufacturer. The level of service and product quality are at the European level. Our site contains the most timely information. Our managers are always glad to help with product selection. The orders take minimal time. Discounts.